GPU Shark 0.21.x released

[JeGX]

Release notes:
https://www.geeks3d.com/20201202/gpu-shark-0-21-0-released/

Version 0.21.0.0 - 2020.12.02
+ added support of NVIDIA GeForce RTX 3060 Ti.
! updated the code to copy GPU data to clipboad (CTRL+C).
  In some cases, GPU data was not copied.
! updated: ZoomGPU 1.28.1 (GPU monitoring library)
  with NVAPI R455.

[Stefan]

Regression:
the degree symbol in GPU temp line turned into gibberish

[JeGX]

Thanks Stefan, I didn't notice that glitch. Probably caused by the new compiler.
Bug fixed in next version.

[JeGX]

GPU Shark 0.21.2 has been released.

Downloads:
https://www.geeks3d.com/20201202/gpu-shark-0-21-0-released/

Version 0.21.2.0 - 2020.12.09
+ added support of AMD Radeon RX 6900 XT.
+ added degree Fahrenheit in the GPU temperature.
* bugfix: the degree symbol in GPU temperature was not displayed properly. 


Version 0.21.1.0 - 2020.12.07
+ added support of some more GeForce GTX 1650 / GTX 1650 Ti.
+ added support of NVIDIA Quadro P620.
+ added more Intel Tiger Lake (GT1) GPUs.
! updated: ZoomGPU 1.28.2 (GPU monitoring library)

[Stefan]

Tested v0.21.2

start gpushark.exe /detailed_view

actually starts in simplified mode

v0.21.1 is OK

[JeGX]

Tested v0.21.2

start gpushark.exe /detailed_view

actually starts in simplified mode

v0.21.1 is OK

Thanks Stefan.
Wrong compilation (I changed the option for the temperature degree test and forgot to restore it). Fixed in v0.21.2.1.

[JeGX]

GPU Shark 0.21.2.1 has been released.

Downloads:
https://www.geeks3d.com/20201202/gpu-shark-0-21-0-released/

Version 0.21.2.0 - 2020.12.09
* bugfix: command line parameters were no longer correctly parsed due to wrong
  compilation option (unicode...).

[Yelik]

Wrong GPU temperature on AMD A10-6700 (how can I add screenshot?).

Same error on GPU_Caps_Viewer and FurMark (built-in GPU_Caps)

[Stefan]

(how can I add screenshot?)

Try TPUCapture

Also double-check with GPU-Z for comparison

[Yelik]

(how can I add screenshot?)

Try TPUCapture

Also double-check with GPU-Z for comparison

I can not attach screenshot to the post.

Temporaraly(7 days) upload it to https://fex.net/s/3npdcl9

[Stefan]

With TPUCapture you can insert pix into the topic like below.






I dusted an old preGCN rig with Zacate APU/Ontario GPU from 2011 using Crimson 15.11 driver.
Temperature is normal with either old or new GPUShark.
Looks like a particular Devastator GPU issue.

[PlayerOne]

Bug ?
GPUShark 0.21.2.1 = RX 570, v0.19.2 = RX580
FurMark 1.22.2.0 = RX 580, 1.23.0.0+ = RX570
GPU-Z All version = RX580
Benchmark performance similar to RX580

[JeGX]

Bug ?
GPUShark 0.21.2.1 = RX 570, v0.19.2 = RX580
FurMark 1.22.2.0 = RX 580, 1.23.0.0+ = RX570
GPU-Z All version = RX580
Benchmark performance similar to RX580

It's likely a bug in the internal database. AMD has many Radeon RX under the same device ID that explains the issue.
I will look at this bug asap. Thanks for your feedback.