Author Topic: Optix 6.0 Path Tracing demo (with RTX support)  (Read 1248 times)

0 Members and 1 Guest are viewing this topic.

jbikker

  • Zombie
  • *
  • Posts: 2
    • View Profile
Optix 6.0 Path Tracing demo (with RTX support)
« on: February 11, 2019, 01:48:18 PM »
Hi all,
Not sure if this is the right place to post, but I wanted to share a link to a path tracing demo built using the new Optix 6.0, with support for the new RTX hardware:
https://ompf2.com/viewtopic.php?f=8&t=2158
Demo should run on Maxwell, Pascal and Turing, provided that you have installed the latest drivers. On Turing, up to 1Grays/s are traced.
- Jacco.
« Last Edit: February 11, 2019, 05:05:08 PM by JeGX »


JeGX

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1988
    • View Profile
    • Geeks3D.com
Re: Optix 6.0 Path Tracing demo (with RTX support)
« Reply #1 on: February 11, 2019, 05:05:56 PM »
Thanks for the demo. I will test it asap.
I updated the topic title for better referencing...

jbikker

  • Zombie
  • *
  • Posts: 2
    • View Profile
Re: Optix 6.0 Path Tracing demo (with RTX support)
« Reply #2 on: February 19, 2019, 08:45:51 AM »
Thanks. There's a new version of the demo out now:
https://ompf2.com/viewtopic.php?f=8&t=2158&p=5886#p5886

This includes filtering (with reprojection), TAA, and greatly improved performance for pre-RTX hardware. A 1060 laptop should now be able to reach 25fps.

- Jacco.

JamesFBlinn

  • Zombie
  • *
  • Posts: 1
    • View Profile
Re: Optix 6.0 Path Tracing demo (with RTX support)
« Reply #3 on: February 19, 2019, 01:58:16 PM »
Really impressive Demo. Runs great on a 2080ti even in 4k.
Would be nice to get the manual controls of 0.1 or 0.2 in 0.3 as well.