Geeks3D Forums

Tech Forums => Geeks3D's GPU Tools => Topic started by: rehanov on October 05, 2021, 09:51:18 PM

Title: gpu usage in stress test
Post by: rehanov on October 05, 2021, 09:51:18 PM
hello
i just downloaded furmark to make a stress test
i have acer nitro laptop , and vga cars is rtx 2060
and my question here is during the gpu stress test for 15 minutes the usage is about 94% to 96% it never hits 100%
is that normal or it means the card is not fully efficient
Title: Re: gpu usage in stress test
Post by: JeGX on October 06, 2021, 08:20:53 PM
What is the resolution? Are your clock speeds ok (aren't they down-clocked the the NV driver)?
An usage of 99% is something normal with a TDP near to 100%.
Title: Re: gpu usage in stress test
Post by: rehanov on October 07, 2021, 03:35:48 PM
resolution is 1920 x 1080
Title: Re: gpu usage in stress test
Post by: Max Dralle on October 07, 2021, 06:51:25 PM
You could use Afterburner to increase your card's power and temperature targets.

If that doesn't get you closer to 100%, something else might be interfering and using some GPU cycles.

Reaching 100% GPU usage is not guaranteed though, but 99% should be possible.