Raspberry Pi Compute Module 4

Started by JeGX, October 19, 2020, 12:11:08 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JeGX

Quote
It's become a tradition that we follow each Raspberry Pi model with a system-on-module variant based on the same core silicon. Raspberry Pi 1 gave rise to the original Compute Module in 2014; Raspberry Pi 3 and 3+ were followed by Compute Module 3 and 3+ in 2017 and 2019 respectively. Only Raspberry Pi 2, our shortest-lived flagship product at just thirteen months, escaped the Compute Module treatment.

It's been sixteen months since we unleashed Raspberry Pi 4 on the world, and today we're announcing the launch of Compute Module 4, starting from $25.

==================================

Raspberry Pi Compute Module 4 harnesses the compute power of the popular Raspberry Pi 4 Model B, bringing it to a smaller form factor suitable for  integration into products.

Key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K, hardware video decode at up to 4Kp60, up  to 8GB of RAM, Gigabit Ethernet, USB 2.0, dual camera interfaces, and PCIe Gen 2 x1 interface.

The optional dual-band 2.4/5.0GHz wireless LAN and Bluetooth 5.0 have modular compliance certification. This allows the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market. Either the onboard antenna or an external antenna kit can be used.

Compute Module 4 has optional onboard eMMC of 8GB, 16GB or 32GB.

Links
- Compute Module 4 Announcement
- Compute Module 4
- Raspberry Pi Compute Module 4 product brief
- Raspberry Pi Compute Module 4 datasheet
- The Raspberry Pi Compute Module 4 Video Review


The Raspberry Pi Compute Module 4
Raspberry Pi Compute Module 4
Raspberry Pi Compute Module 4


The Raspberry Pi Compute Module 4 IO Board
Raspberry Pi Compute Module 4 IO Board

BabbRust

#1
Hi.....the CM with if and how they manage that PCI-e path is genuine intriguing.

Pi4a they may very well overlook a hdmi, eth and usb3 and for make it's anything but a Pi4b-2b with more modest organization and connectors missing.

Perhaps give bind cushions and potential hacks or just thoroughly preclude so its lower cost doesn't struggle with the register.

Pi3 after this period of time I would think will stay with no guarantees, actually got a piece before EoL however not too long.

Figure model will be pro likely a serious fascinating auto suggestion and some more.

https://www.7pcb.com/