Author Topic: NVIDIA Jetson Tegra K1 Documentation  (Read 1031 times)

0 Members and 1 Guest are viewing this topic.

Stefan

  • Global Moderator
  • Hero Member

  • Offline
  • *****

  • 2912
    • View Profile
NVIDIA Jetson Tegra K1 Documentation
« on: March 26, 2014, 05:03:31 PM »
Quote
NVIDIA Jetson TK1 Documentation

PM375 is a board for Tegra K1 development. PM375 provides basic boot options with expansion connectors to enable unused ports to be interfaced with customized hardware.
Basic Configuration
 Tegra K1 SOC
 2 Gbyte x16 memory with 64 bit width (can accommodate from 1-4 GByte total)
 16GB 4.51 eMMC memory (footprint expandable from 16-256GByte memory)
 One empty half mini-PCIE slot with one USB and single lane PEX
 One SD/MMC connector
 One USB 2.0 port, micro AB
 One USB 3.0 port, type A
 HDMI port, type A
 TMP451 temperature monitor
 RS232 Serial port routed to UART4
 ALC5639 Realtek Audio codec with separate MIC in and Line out jacks
 RTL8111GS Realtek GigE LAN/PHY with PEX interface
 One SATA data port
 SPI 4MByte Boot Flash device
 AMS AS3722 Power Management IC for power and sequencing
 Board ID EEPROM

Debug/Test Header Configuration

Pinout will be compatible with ARM JTAG20 pinout used on Amontec JTAG2Key2 debugger and others. More information on the ARM JTAG 20 is here –

I hope upcoming Tegra K1 powered phones will also be JTAG compatible.
Good if you "hard-bricked" your phone  :P