Comments on: FurMark 1.7.0: The Bad Boy of Graphics Cards Utilities is Back! http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/ 3D Tech News, Pixel Hacking, Data Visualization and 3D Programming Fri, 19 Mar 2010 20:51:13 +0200 http://wordpress.org/?v=2.9.1 hourly 1 By: System: Kritischer Fehler, Ereignis 41: Kernel-Power | PC friert ein bei COD MW2 zocken!!! - Dr. Windows http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-2/#comment-10380 System: Kritischer Fehler, Ereignis 41: Kernel-Power | PC friert ein bei COD MW2 zocken!!! - Dr. Windows Sat, 13 Mar 2010 14:45:01 +0000 http://www.geeks3d.com/?p=4721#comment-10380 [...] howhig, Prim95 belastet nur den Prozessor und Arbeitsspeicher. Die Grafik kannst du hiermit Testen: FurMark 1.7.0: The Bad Boy of Graphics Cards Utilities is Back! - 3D Tech News, Pixel Hacking, Data ... Dabei im Hintergrund den HWMonotor laufen lassen. Der zeigt dann die MIn_Max Temperaturen an. Oder [...] [...] howhig, Prim95 belastet nur den Prozessor und Arbeitsspeicher. Die Grafik kannst du hiermit Testen: FurMark 1.7.0: The Bad Boy of Graphics Cards Utilities is Back! – 3D Tech News, Pixel Hacking, Data … Dabei im Hintergrund den HWMonotor laufen lassen. Der zeigt dann die MIn_Max Temperaturen an. Oder [...]

]]> By: JeGX http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-2/#comment-10263 JeGX Fri, 05 Mar 2010 10:08:51 +0000 http://www.geeks3d.com/?p=4721#comment-10263 Two possibilities: 1 - the VRM part of your radeons (but with Cypress based cards, VRM are hardware protected) 2 - your PSU Two possibilities:
1 – the VRM part of your radeons (but with Cypress based cards, VRM are hardware protected)
2 – your PSU

]]> By: Ari http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-2/#comment-10262 Ari Fri, 05 Mar 2010 10:00:33 +0000 http://www.geeks3d.com/?p=4721#comment-10262 Hello, each time i want to run " Furmark multiGpu" the program starts, bench for a few seconds and then the System shut down..... Why ?? My System: amd phenom II x4 965, 2x Sapphire 5770, 8 GB Corsair Dominator (DDr2) and 600 Watt Hello,

each time i want to run ” Furmark multiGpu” the program starts, bench for a few seconds and then the System shut down…..

Why ??

My System:

amd phenom II x4 965, 2x Sapphire 5770, 8 GB Corsair Dominator (DDr2) and 600 Watt

]]> By: AHHHH Frustrating GPU - Overclock.net - Overclocking.net http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-2/#comment-10251 AHHHH Frustrating GPU - Overclock.net - Overclocking.net Fri, 05 Mar 2010 02:54:45 +0000 http://www.geeks3d.com/?p=4721#comment-10251 [...] one? love to hear about it because this one obviously fails lol My personal favs Furmark http://www.geeks3d.com/20090703/furm...ities-is-back/ OCCT http://www.softpedia.com/get/Tweak/S...estroika.shtml They will stress the hell out of your [...] [...] one? love to hear about it because this one obviously fails lol My personal favs Furmark http://www.geeks3d.com/20090703/furm…ities-is-back/ OCCT http://www.softpedia.com/get/Tweak/S…estroika.shtml They will stress the hell out of your [...]

]]> By: theKryz http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-2/#comment-9991 theKryz Fri, 12 Feb 2010 10:21:56 +0000 http://www.geeks3d.com/?p=4721#comment-9991 Thanks, I built myself a .bat and it works great :D Thanks, I built myself a .bat and it works great :D

]]> By: JeGX http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-2/#comment-9950 JeGX Thu, 11 Feb 2010 07:48:05 +0000 http://www.geeks3d.com/?p=4721#comment-9950 Currently no unless you have your tool that can start and stop FurMark. FurMark has <a href="http://www.geeks3d.com/20081123/geeks3d-howto-know-furmarks-command-line-parameters/" rel="nofollow">command line params</a> and combining your tool and these params can be the solution. Currently no unless you have your tool that can start and stop FurMark. FurMark has command line params and combining your tool and these params can be the solution.

]]> By: theKryz http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-2/#comment-9949 theKryz Thu, 11 Feb 2010 07:29:02 +0000 http://www.geeks3d.com/?p=4721#comment-9949 Hi guys, is there a way to let the benchmark run for ~20min and then pause for 40min, then get going again - and this in an endless loop? I want to heat and cool my graphics chip, then reheat it and so on... Hi guys,

is there a way to let the benchmark run for ~20min and then pause for 40min, then get going again – and this in an endless loop? I want to heat and cool my graphics chip, then reheat it and so on…

]]> By: Frequent Blue Screens-HELP! - Page 3 - Hardware Canucks http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-9698 Frequent Blue Screens-HELP! - Page 3 - Hardware Canucks Sat, 30 Jan 2010 14:45:04 +0000 http://www.geeks3d.com/?p=4721#comment-9698 [...] Furmark (defective GPU). I'm not one for posting direct download links, so to the following page FurMark 1.7.0: The Bad Boy of Graphics Cards Utilities is Back! - 3D Tech News, Pixel Hacking, Data ... and use the download button right under the screenshot. Catalyst Control Center can tell you the [...] [...] Furmark (defective GPU). I'm not one for posting direct download links, so to the following page FurMark 1.7.0: The Bad Boy of Graphics Cards Utilities is Back! – 3D Tech News, Pixel Hacking, Data … and use the download button right under the screenshot. Catalyst Control Center can tell you the [...]

]]> By: Better stress tool for video card memory? - Overclock.net - Overclocking.net http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-9650 Better stress tool for video card memory? - Overclock.net - Overclocking.net Wed, 27 Jan 2010 07:00:24 +0000 http://www.geeks3d.com/?p=4721#comment-9650 [...] http://www.geeks3d.com/20090703/furm...ities-is-back/ __________________ So you want to water cool vid Water Cooled Case suggestions Cosmos S [...] [...] http://www.geeks3d.com/20090703/furm…ities-is-back/ __________________ So you want to water cool vid Water Cooled Case suggestions Cosmos S [...]

]]> By: Was verbraucht euer Rechner? - Die Hardware-Community f http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-9524 Was verbraucht euer Rechner? - Die Hardware-Community f Sat, 16 Jan 2010 20:48:17 +0000 http://www.geeks3d.com/?p=4721#comment-9524 [...] [...] [...] [...]

]]> By: ATI Radeon HD 5670: Direct3D 11 and OpenGL 3.2 for the Masses - 3D Tech News, Pixel Hacking, Data Visualization and 3D Programming - Geeks3D.com http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-9488 ATI Radeon HD 5670: Direct3D 11 and OpenGL 3.2 for the Masses - 3D Tech News, Pixel Hacking, Data Visualization and 3D Programming - Geeks3D.com Thu, 14 Jan 2010 10:22:12 +0000 http://www.geeks3d.com/?p=4721#comment-9488 [...] FurMark 1.7.0 performance test: [...] [...] FurMark 1.7.0 performance test: [...]

]]> By: Geeks3D – 2009 Retrospective | The Geeks Of 3D - 3D Tech News http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-9287 Geeks3D – 2009 Retrospective | The Geeks Of 3D - 3D Tech News Fri, 01 Jan 2010 20:02:11 +0000 http://www.geeks3d.com/?p=4721#comment-9287 [...] FurMark 1.7.0: The Bad Boy of Graphics Cards Utilities is Back! [...] [...] FurMark 1.7.0: The Bad Boy of Graphics Cards Utilities is Back! [...]

]]> By: Arde placa video! - My Garage http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-8924 Arde placa video! - My Garage Wed, 09 Dec 2009 12:08:30 +0000 http://www.geeks3d.com/?p=4721#comment-8924 [...] să nu meargă Furmark pe Windows 7 x64? :-O Downloadează ultima versiune (1.7.0) de aici. __________________ - HIS ATI Radeon HD4770 mini review + 2 X ATI HD4770 Crossfire - Samsung [...] [...] să nu meargă Furmark pe Windows 7 x64? :-O Downloadează ultima versiune (1.7.0) de aici. __________________ – HIS ATI Radeon HD4770 mini review + 2 X ATI HD4770 Crossfire – Samsung [...]

]]> By: don http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-8848 don Fri, 04 Dec 2009 15:57:26 +0000 http://www.geeks3d.com/?p=4721#comment-8848 i get error message that the files in the downloaded pack is corrupted? anyone else having this problem? i get error message that the files in the downloaded pack is corrupted? anyone else having this problem?

]]> By: Overclocking the Radeon HD 5850 « Icrontic Tech http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-8649 Overclocking the Radeon HD 5850 « Icrontic Tech Sat, 21 Nov 2009 21:52:06 +0000 http://www.geeks3d.com/?p=4721#comment-8649 [...] Furmark: Stress-testing application for your overclock. [...] [...] Furmark: Stress-testing application for your overclock. [...]

]]> By: SharkerSK http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-8534 SharkerSK Mon, 16 Nov 2009 23:27:36 +0000 http://www.geeks3d.com/?p=4721#comment-8534 Hi guys, I have problem. If I run furmark and Gpu-Z together my windows freezes. I have Ati X1900XT and W XP SP3 and Catalyst 9.3 drivers. So I think that this is a bug... If i dont run gpuz everything is OK :)) If i run it together = false. Hi guys, I have problem.
If I run furmark and Gpu-Z together my windows freezes.
I have Ati X1900XT and W XP SP3 and Catalyst 9.3 drivers.
So I think that this is a bug…
If i dont run gpuz everything is OK :) )
If i run it together = false.

]]> By: Stress gpu - My Garage http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-8480 Stress gpu - My Garage Sat, 14 Nov 2009 06:12:41 +0000 http://www.geeks3d.com/?p=4721#comment-8480 [...] placa video folosesti furmark si alegi stability test si eventual si extreme burning mode. Monitorizezi temperatura cu rivatuner- [...] [...] placa video folosesti furmark si alegi stability test si eventual si extreme burning mode. Monitorizezi temperatura cu rivatuner- [...]

]]> By: Overclocking a Radeon HD 5850 | The Geeks Of 3D - 3D Tech News http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-8412 Overclocking a Radeon HD 5850 | The Geeks Of 3D - 3D Tech News Wed, 11 Nov 2009 08:04:07 +0000 http://www.geeks3d.com/?p=4721#comment-8412 [...] FurMark: Stress-testing application for your overclock. [...] [...] FurMark: Stress-testing application for your overclock. [...]

]]> By: Stress test your video card with FurMark and GPU-Z | Rarst.net http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-8255 Stress test your video card with FurMark and GPU-Z | Rarst.net Sun, 01 Nov 2009 20:47:03 +0000 http://www.geeks3d.com/?p=4721#comment-8255 [...] Download http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/ [...] [...] Download http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/ [...]

]]> By: esd damage on my video card? - Page 2 - Hardware Canucks http://www.geeks3d.com/20090703/furmark-1-7-0-the-bad-boy-of-graphics-cards-utilities-is-back/comment-page-1/#comment-8225 esd damage on my video card? - Page 2 - Hardware Canucks Sat, 31 Oct 2009 16:38:06 +0000 http://www.geeks3d.com/?p=4721#comment-8225 [...] card failure, however. To put the concerns of the OP to rest though, he could test his card using FurMark 1.7.0 which would test the core and then use MemtestG80 which would test the RAM on the card. I think [...] [...] card failure, however. To put the concerns of the OP to rest though, he could test his card using FurMark 1.7.0 which would test the core and then use MemtestG80 which would test the RAM on the card. I think [...]

]]>